Nespresso D290 Espresso Machine Support

Remember, the machine needs to be setup as per the manual. If you do not have power to the unit; try it at another wall outlet. Other than that, call 1 866 901 2739 for technical support.

Had the same problem. I think this happens when the pressure builds up inside. U cant try and open the lever when the machine is in the extraction phase. Just switch off the machine and wait. Mine opened about 3-4 hrs later. Had to exert some...

sorry for the obvious but there is not a lot of troubleshooting for this issue... when was the last time u descaled? if more than 6 months then do one. make sure there is no capsules stuck between input and used bin. close the slider properly.if not...

Not a fan of nespresso, we have their units and the company does not make parts or service info available. Plus accessing the internal parts requires a special tool. If you haven't had the unit very long they will most likely warranty it, and if...

Just a brief addition, I don't have the Magimix model, but I have a similar one. It loses it's programmed settings if it is unplugged or switched off at the wall, but if you leave it plugged in but turn it off with the switch at the back it keeps the...

Please see http://www.fixya.com/support/t14787831-nespresso_u_all_lights_flashing_pod for previous answer, or see troubleshooting at http://www.nespresso-us.com/media/product/PDF/38manual.pdf

whats it worth it might be cheeper to trade up too a newer one or i see an electrician in your future -most of these are costly

Is the heat element not working

Are you using genuine Nespresso capsules? Any other kind will cause the machine to malfunction.

Try the Nespresso online help line.

These machines are designed to be descaled ONLY with the genuine Nespresso descaling kit. It would be worth trying this. But never vinegar - never!

It appears that one of the gaskets is leaking.

call the plumber! that meant your toilet is broken...

Has anyone operated your machine that was unfamiliar with the correct method. It sound as though the quantity has been reset. Try holding both buttons down while turning the machine on - hold till buttons stop flashing. This will reset to factory...

1: Depending on how long you've had your machine, it may need descaling. The machines are preset for hard water - if you're in an area with soft water, try pressing and holding the Lungo button while you turn the machine on. Hold until the lights...

Try pressing and holding all four buttons down, then, while still holding the four buttons down, turn the machine on with the power switch. This should return the machine to its factory settings. If you've had the machine for a year or more it may...

If it is Nespresso branded then contact them, check on Google. If it is another brand but using the Nespresso pods then contact the distributors of that other brand.

There are no fuses on these machines. If it is not getting hot and making your coffee it is because the heating element is open and needs to be replaced.

think I would just buy a new one

might be a simple setting issue : such as "double shot" Check well your machine's setting. Cheers p.s. you are right, altitude would not change your coffee.

Electrical issue

The lever of the nespresso C101 will not open. The capsule seems to be stuck inside

Nespresso U coffee does not come through the spout

Flashing nespresso

Brand new Nespresso Inissia M105 won't heat the water

Why does My nespresso machine keeps on flashing 3 lights

Why won't my Nespresso's switch power on/turn on?

Why is Coffee not coming out

Why my nespresso c110 cofee machine will not pierce the top of the pod and thereFore no coffee.

Nespresso cs220 service manual wanted

cleaned nespresso machine and now get white water

My Nespresso UMat is leaking from the bottom of the machine. I have descaled, cleaned etc but it happens all the time still. Any ideas?

The water coming from wrong direction.

My nespresso stops half way though making a cup of coffee and have to press the button again repeatly to start it again

1.My Nespresso Pixie Lights never stop flashing. 2. I also want to reset to factory settings because the cup portions are off. 3. I feel the water temperatures is never hot enough for the coffee

Nespresso latisimo plus 4 lights keep flashing when switch on and just switches off?

The part that holds the water is cracked can I get a new one as its leaking

Where do I find the fuse in a coffee machine, nespresso XN6006 (Krups)?

where can I repair my Nespresso machine in mumbai

I have move to a place at around 2500m above see level and my coffee from my Nespresso machine taste very different than before, more bitter (at about 500m).